This page contains a list of all Tetra talkgroups available on the VK Reflector.

Important: Tetra talkgroups (talkgroups that are 3, 4 or 5 digits) are for Tetra traffic only. If you wish to use other modes (Such as P25 or DMR), please use one of the 6 digit “other mode” talkgroups.

The SDS number should be programmed in to your radio, and your svxlink.conf file to enable you to change talkgroups from the radio by sending an SDS message to your gateway.

VK Tetra Talkgroups

SDSTalkgroup NumberTalkgroup NameNotes
36050505AustraliaMain Australian Talkgroup
360515050Antartica
360525051ACT Statewide
360535052NSW Statewide
360545053VIC Statewide
360555054QLD Statewide
360565055SA Statewide
360575056WA Statewide
360585057TAS Statewide
360595058NT Statewide
3606050591VK TAC 1Chat Channel 1
3606150592VK TAC 2Chat Channel 2
3606250593VK TAC 3Chat Channel 3
3606350594VK TAC 4Chat Channel 4
3606450595VK TAC 5Chat Channel 5
3606550598WICENTo be used by WICEN
3606650599EMERGENCYEmergency use only – may not be monitored

Non-VK Tetra Talkgroups

SDSTalkgroup NumberTalkgroup NameNotes
3339191World WideWorld wide talkgroup
33060206Belgium
33080208France
33140214Spain
33260226Romania
33350235UK
33620262Germany

Other modes linked to Tetra

SDSTalkgroup NumberTalkgroup NameNotes
36067505901P25 10444Linked to P25 talkgroup 10444 (vk64.chiffers.com)
3606850590250525 Australian DMR, Analogue and P25 BridgeLinked to DMR Brandmeister TG 50525, P25 Talkgroup 50525 and a number of Analogue Repeaters.
360699990Network ParrotThis is an audio test service that will repeat back what it hears a few seconds after you de-key.

You can use the network parrot to test your audio into the network and experience what others will hear.

SDS Talkgroup Programming Guidance

For Sepura radios, add the SDS code and talkgroup name in Radio Manager under Profile > Profile Name > Menu > Status Message Configuration

For Motorola Radios (exluding your gateway, which does not require adding SDS commands), add the SDS code and talkgroup name in CPS under Data Services > Status id List

Then, in your svxlink.conf file (if you run a gateway), ensure you have a corresponding SDS code linked to a talkgroup number. You can use the below list to update your config:

[SdsToCommand]
33280=121
33281=120
61000=9*
33009=919
33391=9191
33040=91204
33080=91208
33260=91226
33320=91232
33620=91262
33350=91235
34003=912263
34006=912266
34007=912267
34009=912269
33140=91214
40990=919990
36050=91505
36051=915050
36052=915051
36053=915052
36054=915053
36055=915054
36056=915055
36057=915056
36058=915057
36059=915058
36060=9150591
36061=9150592
36062=9150593
36063=9150594
36064=9150595
36065=9150598
36066=9150599
36067=91505901
36068=91505902
36069=919990